Aviation Lubricant Research
Copies of these reports are available through:
| Society of Automotive Engineers |
| 400 Commonwealth Drive |
Warrendale, Pennsylvania 15096
phone 1-877-606-7323 (U.S. and Canada); 724-776-4970
fax 724-776-0790
email: publications@sae.org
web: www.sae.org |
Interim Progress Report on Airframe Lubricants. CRC-284. 6/54. (Includes Research Technique for Determination Corrosion on Grease-Coated Ball Bearings: L-34; Research Technique for Determination of Performance Characteristics of Lubricating Grease in Anti-friction Bearings at Elevated Temperatures: L-35; Research Technique for Measuring Effect of Lubricating Grease Characteristics on Minimizing of Fretting Corrosion in Unshielded Thrust-Loaded Ball Bearings: L-36).
Ring-Sticking Tendencies of Aviation Engine Lubricanting Oils. CRC-233. 11/48. (Includes Research Technique for Evaluation of Ring-Sticking Tendencies of Aviation Engine Lubricating Oils: L-30-349).
Development of Research Technique for the Determination of Performance Characteristics of Lubricating Grease in Anti-friction Bearings at Elevated Temperatures (700°F). CRC-363. 3/63.
Results of 1960 CRC Cooperative Tests to Study Present Techniques and Equipment for Defining Gear Scruffing Properties of Aviation Gas Turbine Lubricants. CRC-379. 5/64.
Development of Research Technique for the Determination of Performance Characteristics of Lubricating Grease in Anti-friction Bearings at Elevated Temperatures (450°F) and Under Thrust Loads up to 320 Pounds. CRC-397. 9/66.
Round-Robin Oxidation Test Results on Oil at 425°F Using Procedures A and B of Research Technique for Determining the Oxidative Stability of Aircraft Gas Turbine Lubricants at High Temperature (500°F) in the Presence of Metals. CRC-412. 7/68.
Development of Equipment and Techniques for Evaluating Effects of Oils on Bearing Fatigue Life. CRC-413. 6/68.
Development of Research Technique for Measuring Wear Life of Bonded Solid Lubricant Coatings for Air-frames Using the Falex Tester. CRC-419. 8/68.
Design and Evaluation of a Small Bearing Grease Test Rig. CRC-437. 12/70.
Report on the Round Robin Carbon Seal Wear Test. CRC-462. 7/73.
Development of Equipment and Techniques for Evaluating Deposits and Oil Degradation Characteristics of Aircraft Gas Turbine Lubricating Oils. CRC-465. 5/74.
An Investigation of Three Synthetic Gas Turbine Lubricants for Oil Aeration and Foaming Tendencies. CRC-468. 6/74.
Rolling Contact Fatigue Test Results for Various EHD Film Thickness Ratios from Selected Test Rigs. CRC-506. 6/79.
Flammability of Aircraft Hydraulic Fluids - A Bibliography. CRC-546. 1/86.
| 
