TECHNIQUES AND INSTRUMENTATION FOR ANALYSIS OF EXHAUST
GASES FOR PARTICULATE MATTER AND POLYNUCLEAR AROMATICS |
| (CRC Project No. CAPE-12-68) |
| Objective: |
To develop techniques and instrumentation for the sampling and analysis of
exhaust gases for particulate matter and polynuclear aromatic content. Reducing the
analytical cost and elapsed analytical time was of prime importance. |
|
|
NTIS Accession No. |
Contractor |
| Reports: |
The Physical-Chemical Characteristics of Particulates Associated with Polynuclear
Aromatic Hydrocarbons Present in Automobile Exhaust |
PB 196 796 |
Battelle Memorial Institute (January 1970) |
|
Progress in Development of Rapid Methods of Analysis for Trace Quantities of
Polynuclear Aromatic Hydrocarbons in Automobile Exhaust |
PB 196 808 |
Esso Research & Engineering (February 1970) |
|
Rapid Methods of Analysis for Trace Quantities of Polynuclear Aromatic Hydrocarbons
and Phenols in Automobile Exhaust, Gasoline, and Crankcase Oil |
PB 219 025 |
Esso Research & Engineering (December 1971) |
